These settings allow you to boost the speed of your broadband Internet connection when using a Cable Modem or DSL Router with Windows 2000 and Windows XP.
Open your registry and find the key below.
Create the following DWORD values, as most of these values will not already exist you will need to create them by clicking on 'Edit -> New -> DWORD Value' and then set the value as shown below.
DefaultTTL = "80" hex (or 128 decimal)
Specifies the default time to live (TTL) for TCP/IP packets. The default is 32.
EnablePMTUBHDetect = "0"
Specifies whether the stack will attempt to detect Maximum Transmission Unit (MTU) routers that do not send back ICMP fragmentation-needed messages. The default is 0.
EnablePMTUDiscovery = "1"
Specifies whether the TCP/IP stack will attempt to perform path MTU discovery as specified in RFC 1191. The default is 1.
GlobalMaxTcpWindowSize = "7FFF" hex (or 32767 decimal)
Specifies the system maximum receive window size advertised by the TCP/IP stack.
TcpMaxDupAcks = "2"
Determines the number of duplicate ACKs that must be received for the same sequence number of sent data before "fast retransmit" is triggered.
SackOpts = "1"
Enables support for selective acknowledgements as documented by Request for Comment (RFC) 2018. Default is 0.
Tcp1323Opts = "1"
Controls RFC 1323 time stamps and window scaling options. Possible values are: "0" = disable RFC 1323 options, "1" = window scale enabled only, "2" = time stamps enabled only and "3" = both options enabled.
TcpWindowSize = "7FFF" hex (or 32767 decimal)
Specifies the receive window size advertised by the TCP/IP stack. If you have a latent network you can try increasing the value to 93440, 186880, or 372300.
Exit your registry and restart Windows for the changes to take effect.
If you don’t want to edit the registry, here's a little TCP utility that is ideal...
http://www.broadbandreports.com/front/doctorping.zip
Search
Custom Search
Thursday, June 12, 2008
Make A Autorun File For Ur Cd
If you wanna make a autorun file for that CD you are ready to burn just read this...
1) You open notepad
2) now you writ: [autorun]
OPEN=INSTALL\Setup_filename.EXE
ICON=INSTALL\Setup_filename.EXE
Now save it but not as a .txt file but as a .inf file.
But remember! The "Setup_filename.EXE" MUST be replaced with the name of the setup file. And you also need to rember that it is not all of the setup files there are called '.exe but some are called '.msi
3) Now burn your CD with the autorun .inf file included.
4) Now set the CD in you CD drive and wait for the autorun to begin or if nothing happens just double-click on the CD drive in "This Computer"
1) You open notepad
2) now you writ: [autorun]
OPEN=INSTALL\Setup_filename.EXE
ICON=INSTALL\Setup_filename.EXE
Now save it but not as a .txt file but as a .inf file.
But remember! The "Setup_filename.EXE" MUST be replaced with the name of the setup file. And you also need to rember that it is not all of the setup files there are called '.exe but some are called '.msi
3) Now burn your CD with the autorun .inf file included.
4) Now set the CD in you CD drive and wait for the autorun to begin or if nothing happens just double-click on the CD drive in "This Computer"
How to recover MOST of scratched CD data discs
I learn an old thecnique to how to recover damaged or scratched disks with some lost of data. In this case i have one borrowed game - MAX PAYNE 2 with a chunck of 4 mb lost with a scratch in CD1 Install. Here we cover some special thecniques of how to create a full working CD from the scratched one.
First some tools will be needed:
1. Alcohol 120%
2. UltraISO
3. Windows XP/2000 (not tested on 95/98/me)
3. Small piece of cotton
4. Dry cleaner paper
5. Finally, oil for cooking.
First step - preparing the CD
Get the cotton and drop some water, start cleaning vertically the surface of CD.Do it 3 times and dry the water with a piece of dry cleaner paper. With a new piece of cotton, drop some oil for cooking and start to wet the surface like you are washing the CD with the oil. Dry carefully now. Some particles of oil will stay on the
microsurface of the scrath. It's okay. Seems the oil helps the laser of the CD/DVD driver to read the surface again. Sure this will work with small unreadable scratchs - some hard scratchs loose parts of the surface of the CD where we have data and it's lost forever. But if it is loosed try anyway. Whith this tip 80% of the small scratched CD's coud be recovered.
Second Step - testing the CD
With Alcohol 120% make an ISO - image making wizard - and lets see if the app can read the loosed surface. In my case Alcohol 120% had recovered 60% of the data. This is not enough. Have tryed other appz, they do not recover all the data. But the
CD/DVD driver laser CAN recover all data in this case. the data is still there, what we do?
third step - making the new CD
With the main copy system of windows explorer you can do it.Just create one folderwith the same name of the CD label for future burn reference,and copy the CD content to the folder. When the CD copy process find the scratch, in majority of the cases, it's slow down the reading and will recover ALL loosed data.If not, it just tell you there's an unreadable sector. In this case your CD is lost. But it's not my case, finally windows explorer got all the data from the scratch and made a copy in the folder.with the ultraISO, wrote the original CD label, drop the content of the folder and save as Iso. You can Test the new CD just mounting the iso in the Alcohol 120%. In my case i did ISO of the two discs from MAX PAYNE 2 and tested installing from the mounted ISO. Works like a charm. I got the 4 mb lost again. So, I have burned the CD and now i have a working copy from the scratched one.
Sounds too bizzarre, but works. Course you can jump the cleaning process and try to copy the content with Windows explorer. But in my case did not work without oil...
First some tools will be needed:
1. Alcohol 120%
2. UltraISO
3. Windows XP/2000 (not tested on 95/98/me)
3. Small piece of cotton
4. Dry cleaner paper
5. Finally, oil for cooking.
First step - preparing the CD
Get the cotton and drop some water, start cleaning vertically the surface of CD.Do it 3 times and dry the water with a piece of dry cleaner paper. With a new piece of cotton, drop some oil for cooking and start to wet the surface like you are washing the CD with the oil. Dry carefully now. Some particles of oil will stay on the
microsurface of the scrath. It's okay. Seems the oil helps the laser of the CD/DVD driver to read the surface again. Sure this will work with small unreadable scratchs - some hard scratchs loose parts of the surface of the CD where we have data and it's lost forever. But if it is loosed try anyway. Whith this tip 80% of the small scratched CD's coud be recovered.
Second Step - testing the CD
With Alcohol 120% make an ISO - image making wizard - and lets see if the app can read the loosed surface. In my case Alcohol 120% had recovered 60% of the data. This is not enough. Have tryed other appz, they do not recover all the data. But the
CD/DVD driver laser CAN recover all data in this case. the data is still there, what we do?
third step - making the new CD
With the main copy system of windows explorer you can do it.Just create one folderwith the same name of the CD label for future burn reference,and copy the CD content to the folder. When the CD copy process find the scratch, in majority of the cases, it's slow down the reading and will recover ALL loosed data.If not, it just tell you there's an unreadable sector. In this case your CD is lost. But it's not my case, finally windows explorer got all the data from the scratch and made a copy in the folder.with the ultraISO, wrote the original CD label, drop the content of the folder and save as Iso. You can Test the new CD just mounting the iso in the Alcohol 120%. In my case i did ISO of the two discs from MAX PAYNE 2 and tested installing from the mounted ISO. Works like a charm. I got the 4 mb lost again. So, I have burned the CD and now i have a working copy from the scratched one.
Sounds too bizzarre, but works. Course you can jump the cleaning process and try to copy the content with Windows explorer. But in my case did not work without oil...
Subscribe to:
Posts (Atom)
